Bare metal configuration

Full EKS Anywhere configuration reference for a Bare Metal cluster.

This is a generic template with detailed descriptions below for reference. The following additional optional configuration can also be included:

To generate your own cluster configuration, follow instructions from the Bare Metal Create production cluster section and modify it using descriptions below. For information on how to add cluster configuration settings to this file for advanced node configuration, see Advanced Bare Metal cluster configuration .

apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: Cluster
metadata:
  name: my-cluster-name
spec:
  clusterNetwork:
    cniConfig:
      cilium: {}
    pods:
      cidrBlocks:
      - 192.168.0.0/16
    services:
      cidrBlocks:
      - 10.96.0.0/12
  controlPlaneConfiguration:              
    count: 1
    endpoint:
      host: "<Control Plane Endpoint IP>"
    machineGroupRef:
      kind: TinkerbellMachineConfig
      name: my-cluster-name-cp
  datacenterRef:
    kind: TinkerbellDatacenterConfig
    name: my-cluster-name
  kubernetesVersion: "1.23"
  managementCluster:
    name: my-cluster-name
  workerNodeGroupConfigurations:
  - count: 1
    machineGroupRef:
      kind: TinkerbellMachineConfig
      name: my-cluster-name
    name: md-0

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellDatacenterConfig
metadata:
  name: my-cluster-name
spec:
  tinkerbellIP: "<Tinkerbell IP>"

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellMachineConfig
metadata:
  name: my-cluster-name-cp
spec:
  hardwareSelector: {}
  osFamily: bottlerocket
  templateRef: {}
  users:
  - name: ec2-user
    sshAuthorizedKeys:
    - ssh-rsa AAAAB3NzaC1yc2... jwjones@833efcab1482.home.example.com

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellMachineConfig
metadata:
  name: my-cluster-name
spec:
  hardwareSelector: {}
  osFamily: bottlerocket
  templateRef:
    kind: TinkerbellTemplateConfig
    name: my-cluster-name
  users:
  - name: ec2-user
    sshAuthorizedKeys:
    - ssh-rsa AAAAB3NzaC1yc2... jwjones@833efcab1482.home.example.com

Cluster Fields

name (required)

Name of your cluster (my-cluster-name in this example).

clusterNetwork (required)

Specific network configuration for your Kubernetes cluster.

clusterNetwork.cniConfig (required)

CNI plugin to be installed in the cluster. The only supported value at the moment is cilium.

clusterNetwork.pods.cidrBlocks[0] (required)

Subnet used by pods in CIDR notation. Please note that only 1 custom pods CIDR block specification is permitted. This CIDR block should not conflict with the clusterNetwork.services.cidrBlocks and network subnet range selected for the machines.

clusterNetwork.services.cidrBlocks[0] (required)

Subnet used by services in CIDR notation. Please note that only 1 custom services CIDR block specification is permitted. This CIDR block should not conflict with the clusterNetwork.pods.cidrBlocks and network subnet range selected for the machines.

clusterNetwork.dns.resolvConf.path (optional)

Path to the file with a custom DNS resolver configuration.

controlPlaneConfiguration (required)

Specific control plane configuration for your Kubernetes cluster.

controlPlaneConfiguration.count (required)

Number of control plane nodes. This number needs to be odd to maintain ETCD quorum.

controlPlaneConfiguration.endpoint.host (required)

A unique IP you want to use for the control plane in your EKS Anywhere cluster. Choose an IP in your network range that does not conflict with other machines.

NOTE: This IP should be outside the network DHCP range as it is a floating IP that gets assigned to one of the control plane nodes for kube-apiserver loadbalancing.

controlPlaneConfiguration.machineGroupRef (required)

Refers to the Kubernetes object with Tinkerbell-specific configuration for your nodes. See TinkerbellMachineConfig Fields below.

controlPlaneConfiguration.taints

A list of taints to apply to the control plane nodes of the cluster.

Replaces the default control plane taint, node-role.kubernetes.io/master. The default control plane components will tolerate the provided taints.

Modifying the taints associated with the control plane configuration will cause new nodes to be rolled-out, replacing the existing nodes.

NOTE: The taints provided will be used instead of the default control plane taint node-role.kubernetes.io/master. Any pods that you run on the control plane nodes must tolerate the taints you provide in the control plane configuration.

controlPlaneConfiguration.labels

A list of labels to apply to the control plane nodes of the cluster. This is in addition to the labels that EKS Anywhere will add by default.

Modifying the labels associated with the control plane configuration will cause new nodes to be rolled out, replacing the existing nodes.

datacenterRef

Refers to the Kubernetes object with Tinkerbell-specific configuration. See TinkerbellDatacenterConfig Fields below.

kubernetesVersion (required)

The Kubernetes version you want to use for your cluster. Supported values: 1.23, 1.22, 1.21

managementCluster

Identifies the name of the management cluster. If this is a standalone cluster or if it were serving as the management cluster for other workload clusters, this will be the same as the cluster name. Bare Metal EKS Anywhere clusters do not yet support the creation of separate workload clusters.

workerNodeGroupConfigurations (required)

This takes in a list of node groups that you can define for your workers. You may define one or more worker node groups.

workerNodeGroupConfigurations.count

Number of worker nodes. Optional if autoscalingConfiguration is used, in which case count will default to autoscalingConfiguration.minCount.

workerNodeGroupConfigurations.machineGroupRef (required)

Refers to the Kubernetes object with Tinkerbell-specific configuration for your nodes. See TinkerbellMachineConfig Fields below.

workerNodeGroupConfigurations.name (required)

Name of the worker node group (default: md-0)

workerNodeGroupConfigurations.autoscalingConfiguration.minCount

Minimum number of nodes for this node group’s autoscaling configuration.

workerNodeGroupConfigurations.autoscalingConfiguration.maxCount

Maximum number of nodes for this node group’s autoscaling configuration.

workerNodeGroupConfigurations.taints

A list of taints to apply to the nodes in the worker node group.

Modifying the taints associated with a worker node group configuration will cause new nodes to be rolled-out, replacing the existing nodes associated with the configuration.

At least one node group must not have NoSchedule or NoExecute taints applied to it.

workerNodeGroupConfigurations.labels

A list of labels to apply to the nodes in the worker node group. This is in addition to the labels that EKS Anywhere will add by default.

Modifying the labels associated with a worker node group configuration will cause new nodes to be rolled out, replacing the existing nodes associated with the configuration.

TinkerbellDatacenterConfig Fields

tinkerbellIP

Required field to identify the IP address of the Tinkerbell service. This IP address must be a unique IP in the network range that does not conflict with other IPs. Once the Tinkerbell services move from the Admin machine to run on the target cluster, this IP address makes it possible for the stack to be used for future provisioning needs. When separate management and workload clusters are supported in Bare Metal, the IP address becomes a necessity.

osImageURL

Optional field to replace the default Bottlerocket operating system. EKS Anywhere can only auto-import Bottlerocket. In order to use Ubuntu or Redhat see building baremetal node images to learn more on building and using Ubuntu with an EKS Anywhere cluster. This field is also useful if you want to provide a customized operating system image or simply host the standard image locally.

hookImagesURLPath

Optional field to replace the HookOS image. This field is useful if you want to provide a customized HookOS image or simply host the standard image locally. See Artifacts for details.

Example TinkerbellDatacenterConfig.spec

spec:
  tinkerbellIP: "192.168.0.10"                                          # Available, routable IP
  osImageURL: "http://my-web-server/ubuntu-v1.23.7-eks-a-12-amd64.gz"   # Full URL to the OS Image hosted locally
  hookImagesURLPath: "http://my-web-server/hook"                        # Path to the hook images. This path must contain vmlinuz-x86_64 and initramfs-x86_64 

This is the folder structure for my-web-server:

my-web-server
├── hook
│   ├── initramfs-x86_64
│   └── vmlinuz-x86_64
└── ubuntu-v1.23.7-eks-a-12-amd64.gz

skipLoadBalancerDeployment

Optional field to skip deploying the default load balancer for Tinkerbell stack.

EKS Anywhere for Bare Metal uses kube-vip load balancer by default to expose the Tinkerbell stack externally. You can disable this feature by setting this field to true.

NOTE: If you skip load balancer deployment, you will have to ensure that the Tinkerbell stack is available at tinkerbellIP once the cluster creation is finished. One way to achieve this is by using the MetalLB package.

TinkerbellMachineConfig Fields

In the example, there are TinkerbellMachineConfig sections for control plane (my-cluster-name-cp) and worker (my-cluster-name) machine groups. The following fields identify information needed to configure the nodes in each of those groups.

NOTE: Currently, you can only have one machine group for all machines in the control plane, although you can have multiple machine groups for the workers.

hardwareSelector

Use fields under hardwareSelector to add key/value pair labels to match particular machines that you identified in the CSV file where you defined the machines in your cluster. Choose any label name you like. For example, if you had added the label node=cp-machine to the machines listed in your CSV file that you want to be control plane nodes, the following hardwareSelector field would cause those machines to be added to the control plane:

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellMachineConfig
metadata:
  name: my-cluster-name-cp
spec:
  hardwareSelector:
    node: "cp-machine"

osFamily (required)

Operating system on the machine. For example, bottlerocket or ubuntu.

templateRef (optional)

Identifies the template that defines the actions that will be applied to the TinkerbellMachineConfig. See TinkerbellTemplateConfig fields below. EKS Anywhere will generate default templates based on osFamily during the create command. You can override this default template by providing your own template here.

users

The name of the user you want to configure to access your virtual machines through SSH.

The default is ec2-user. Currently, only one user is supported.

users[0].sshAuthorizedKeys (optional)

The SSH public keys you want to configure to access your machines through SSH (as described below). Only 1 is supported at this time.

users[0].sshAuthorizedKeys[0] (optional)

This is the SSH public key that will be placed in authorized_keys on all EKS Anywhere cluster machines so you can SSH into them. The user will be what is defined under name above. For example:

ssh -i <private-key-file> <user>@<machine-IP>

The default is generating a key in your $(pwd)/<cluster-name> folder when not specifying a value.

Advanced Bare Metal cluster configuration

When you generate a Bare Metal cluster configuration, the TinkerbellTemplateConfig is kept internally and not shown in the generated configuration file. TinkerbellTemplateConfig settings define the actions done to install each node, such as get installation media, configure networking, add users, and otherwise configure the node.

Advanced users can override the default values set for TinkerbellTemplateConfig. They can also add their own Tinkerbell actions to make personalized modifications to EKS Anywhere nodes.

The following shows two TinkerbellTemplateConfig examples that you can add to your cluster configuration file to override the values that EKS Anywhere sets: one for Ubuntu and one for Bottlerocket. Most actions used differ for different operating systems.

NOTE: For the stream-image action, DEST_DISK points to the device representing the entire hard disk (for example, /dev/sda). For UEFI-enabled images, such as Ubuntu, write actions use DEST_DISK to point to the second partition (for example, /dev/sda2), with the first being the EFI partition. For the Bottlerocket image, which has 12 partitions, DEST_DISK is partition 12 (for example, /dev/sda12). Device names will be different for different disk types.

Ubuntu TinkerbellTemplateConfig example

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellTemplateConfig
metadata:
  name: my-cluster-name
spec:
  template:
    global_timeout: 6000
    id: ""
    name: my-cluster-name
    tasks:
    - actions:
      - environment:
          COMPRESSED: "true"
          DEST_DISK: /dev/sda
          IMG_URL: https://my-file-server/ubuntu-v1.23.7-eks-a-12-amd64.gz
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/image2disk:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: stream-image
        timeout: 360
      - environment:
          DEST_DISK: /dev/sda2
          DEST_PATH: /etc/netplan/config.yaml
          STATIC_NETPLAN: true
          DIRMODE: "0755"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0644"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: write-netplan
        timeout: 90
      - environment:
          CONTENTS: |
            datasource:
              Ec2:
                metadata_urls: [<admin-machine-ip>, <tinkerbell-ip-from-cluster-config>]
                strict_id: false
            manage_etc_hosts: localhost
            warnings:
              dsid_missing_source: off            
          DEST_DISK: /dev/sda2
          DEST_PATH: /etc/cloud/cloud.cfg.d/10_tinkerbell.cfg
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0600"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: add-tink-cloud-init-config
        timeout: 90
      - environment:
          CONTENTS: |
            network:
              config: disabled            
          DEST_DISK: /dev/sda2
          DEST_PATH: /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0600"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: disable-cloud-init-network-capabilities
        timeout: 90
      - environment:
          CONTENTS: | 
            datasource: Ec2
          DEST_DISK: /dev/sda2
          DEST_PATH: /etc/cloud/ds-identify.cfg
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0600"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: add-tink-cloud-init-ds-config
        timeout: 90
      - environment:
          BLOCK_DEVICE: /dev/sda2
          FS_TYPE: ext4
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/kexec:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: kexec-image
        pid: host
        timeout: 90
      name: my-cluster-name
      volumes:
      - /dev:/dev
      - /dev/console:/dev/console
      - /lib/firmware:/lib/firmware:ro
      worker: '{{.device_1}}'
    version: "0.1"

Bottlerocket TinkerbellTemplateConfig example

Pay special attention to the BOOTCONFIG_CONTENTS environment section below if you wish to set up console redirection for the kernel and systemd. If you are only using a direct attached monitor as your primary display device, no additional configuration is needed here. However, if you need all boot output to be shown via a server’s serial console for example, extra configuration should be provided inside BOOTCONFIG_CONTENTS.

An empty kernel {} key is provided below in the example; inside this key is where you will specify your console devices. You may specify multiple comma delimited console devices in quotes to a console key as such: console = "tty0", "ttyS0,115200n8". The order of the devices is significant; systemd will output to the last device specified. The console key belongs inside the kernel key like so:

kernel {
    console = "tty0", "ttyS0,115200n8"
}

The above example will send all kernel output to both consoles, and systemd output to ttyS0. Additional information about serial console setup can be found in the Linux kernel documentation .

---
apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: TinkerbellTemplateConfig
metadata:
  name: my-cluster-name
spec:
  template:
    global_timeout: 6000
    id: ""
    name: my-cluster-name
    tasks:
    - actions:
      - environment:
          COMPRESSED: "true"
          DEST_DISK: /dev/sda
          IMG_URL: https://anywhere-assets.eks.amazonaws.com/releases/bundles/11/artifacts/raw/1-22/bottlerocket-v1.22.10-eks-d-1-22-8-eks-a-11-amd64.img.gz
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/image2disk:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: stream-image
        timeout: 360
      - environment:
          # An example console declaration that will send all kernel output to both consoles, and systemd output to ttyS0.
          # kernel {
          #     console = "tty0", "ttyS0,115200n8"
          # }
          BOOTCONFIG_CONTENTS: |
                        kernel {}
          DEST_DISK: /dev/sda12
          DEST_PATH: /bootconfig.data
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0644"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: write-bootconfig
        timeout: 90
      - environment:
          CONTENTS: |
            # Version is required, it will change as we support
            # additional settings
            version = 1
            # "eno1" is the interface name
            # Users may turn on dhcp4 and dhcp6 via boolean
            [eno1]
            dhcp4 = true
            # Define this interface as the "primary" interface
            # for the system.  This IP is what kubelet will use
            # as the node IP.  If none of the interfaces has
            # "primary" set, we choose the first interface in
            # the file
            primary = true            
          DEST_DISK: /dev/sda12
          DEST_PATH: /net.toml
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0644"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: write-netconfig
        timeout: 90
      - environment:
          HEGEL_URL: http://<hegel-ip>:50061
          DEST_DISK: /dev/sda12
          DEST_PATH: /user-data.toml
          DIRMODE: "0700"
          FS_TYPE: ext4
          GID: "0"
          MODE: "0644"
          UID: "0"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/writefile:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: write-user-data
        timeout: 90
      - name: "reboot"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/reboot:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        timeout: 90
        volumes:
          - /worker:/worker
      name: my-cluster-name
      volumes:
      - /dev:/dev
      - /dev/console:/dev/console
      - /lib/firmware:/lib/firmware:ro
      worker: '{{.device_1}}'
    version: "0.1"

TinkerbellTemplateConfig Fields

The values in the TinkerbellTemplateConfig fields are created from the contents of the CSV file used to generate a configuration. The template contains actions that are performed on a Bare Metal machine when it first boots up to be provisioned. For advanced users, you can add these fields to your cluster configuration file if you have special needs to do so.

While there are fields that apply to all provisioned operating systems, actions are specific to each operating system. Examples below describe actions for Ubuntu and Bottlerocket operating systems.

template.global_timeout

Sets the timeout value for completing the configuration. Set to 6000 (100 minutes) by default.

template.id

Not set by default.

template.tasks

Within the TinkerbellTemplateConfig template under tasks is a set of actions. The following descriptions cover the actions shown in the example templates for Ubuntu and Bottlerocket:

template.tasks.actions.name.stream-image (Ubuntu and Bottlerocket)

The stream-image action streams the selected image to the machine you are provisioning. It identifies:

  • environment.COMPRESSED: When set to true, Tinkerbell expects IMG_URL to be a compressed image, which Tinkerbell will uncompress when it writes the contents to disk.
  • environment.DEST_DISK: The hard disk on which the operating system is deployed. The default is the first SCSI disk (/dev/sda), but can be changed for other disk types.
  • environment.IMG_URL: The operating system tarball (ubuntu or other) to stream to the machine you are configuring.
  • image: Container image needed to perform the steps needed by this action.
  • timeout: Sets the amount of time (in seconds) that Tinkerbell has to stream the image, uncompress it, and write it to disk before timing out. Consider increasing this limit from the default 600 to a higher limit if this action is timing out.

Ubuntu-specific actions

template.tasks.actions.name.write-netplan (Ubuntu)

The write-netplan action writes Ubuntu network configuration information to the machine (see Netplan ) for details. It identifies:

  • environment.CONTENTS.network.version: Identifies the network version.
  • environment.CONTENTS.network.renderer: Defines the service to manage networking. By default, the networkd systemd service is used.
  • environment.CONTENTS.network.ethernets: Network interface to external network (eno1, by default) and whether or not to use dhcp4 (true, by default).
  • environment.DEST_DISK: Destination block storage device partition where the operating system is copied. By default, /dev/sda2 is used (sda1 is the EFI partition).
  • environment.DEST_PATH: File where the networking configuration is written (/etc/netplan/config.yaml, by default).
  • environment.DIRMODE: Linux directory permissions bits to use when creating directories (0755, by default)
  • environment.FS_TYPE: Type of filesystem on the partition (ext4, by default).
  • environment.GID: The Linux group ID to set on file. Set to 0 (root group) by default.
  • environment.MODE: The Linux permission bits to set on file (0644, by default).
  • environment.UID: The Linux user ID to set on file. Set to 0 (root user) by default.
  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.

template.tasks.actions.add-tink-cloud-init-config (Ubuntu)

The add-tink-cloud-init-config action configures cloud-init features to further configure the operating system. See cloud-init Documentation for details. It identifies:

  • environment.CONTENTS.datasource: Identifies Ec2 (Ec2.metadata_urls) as the data source and sets Ec2.strict_id: false to prevent cloud-init from producing warnings about this datasource.
  • environment.CONTENTS.system_info: Creates the tink user and gives it administrative group privileges (wheel, adm) and passwordless sudo privileges, and set the default shell (/bin/bash).
  • environment.CONTENTS.manage_etc_hosts: Updates the system’s /etc/hosts file with the hostname. Set to localhost by default.
  • environment.CONTENTS.warnings: Sets dsid_missing_source to off.
  • environment.DEST_DISK: Destination block storage device partition where the operating system is located (/dev/sda2, by default).
  • environment.DEST_PATH: Location of the cloud-init configuration file on disk (/etc/cloud/cloud.cfg.d/10_tinkerbell.cfg, by default)
  • environment.DIRMODE: Linux directory permissions bits to use when creating directories (0700, by default)
  • environment.FS_TYPE: Type of filesystem on the partition (ext4, by default).
  • environment.GID: The Linux group ID to set on file. Set to 0 (root group) by default.
  • environment.MODE: The Linux permission bits to set on file (0600, by default).
  • environment.UID: The Linux user ID to set on file. Set to 0 (root user) by default.
  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.

template.tasks.actions.add-tink-cloud-init-ds-config (Ubuntu)

The add-tink-cloud-init-ds-config action configures cloud-init data store features. This identifies the location of your metadata source once the machine is up and running. It identifies:

  • environment.CONTENTS.datasource: Sets the datasource. Uses Ec2, by default.
  • environment.DEST_DISK: Destination block storage device partition where the operating system is located (/dev/sda2, by default).
  • environment.DEST_PATH: Location of the data store identity configuration file on disk (/etc/cloud/ds-identify.cfg, by default)
  • environment.DIRMODE: Linux directory permissions bits to use when creating directories (0700, by default)
  • environment.FS_TYPE: Type of filesystem on the partition (ext4, by default).
  • environment.GID: The Linux group ID to set on file. Set to 0 (root group) by default.
  • environment.MODE: The Linux permission bits to set on file (0600, by default).
  • environment.UID: The Linux user ID to set on file. Set to 0 (root user) by default.
  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.

template.tasks.actions.kexec-image (Ubuntu)

The kexec-image action performs provisioning activities on the machine, then allows kexec to pivot the kernel to use the system installed on disk. This action identifies:

  • environment.BLOCK_DEVICE: Disk partition on which the operating system is installed (/dev/sda2, by default)
  • environment.FS_TYPE: Type of filesystem on the partition (ext4, by default).
  • image: Container image used to perform the steps needed by this action.
  • pid: Process ID. Set to host, by default.
  • timeout: Time needed to complete the action, in seconds.
  • volumes: Identifies mount points that need to be remounted to point to locations in the installed system.

There are known issues related to drivers with some hardware that may make it necessary to replace the kexec-image action with a full reboot. If you require a full reboot, you can change the kexec-image setting as follows:

actions:
- name: "reboot"
  image: public.ecr.aws/l0g8r8j6/tinkerbell/hub/reboot-action:latest
  timeout: 90
  volumes:
  - /worker:/worker

Bottlerocket-specific actions

template.tasks.actions.write-bootconfig (Bottlerocket)

The write-bootconfig action identifies the location on the machine to put content needed to boot the system from disk.

  • environment.BOOTCONFIG_CONTENTS.kernel: Add kernel parameters that are passed to the kernel when the system boots.
  • environment.DEST_DISK: Identifies the block storage device that holds the boot partition.
  • environment.DEST_PATH: Identifies the file holding boot configuration data (/bootconfig.data in this example).
  • environment.DIRMODE: The Linux permissions assigned to the boot directory.
  • environment.FS_TYPE: The filesystem type associated with the boot partition.
  • environment.GID: The group ID associated with files and directories created on the boot partition.
  • environment.MODE: The Linux permissions assigned to files in the boot partition.
  • environment.UID: The user ID associated with files and directories created on the boot partition. UID 0 is the root user.
  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.

template.tasks.actions.write-netconfig (Bottlerocket)

The write-netconfig action configures networking for the system.

  • environment.CONTENTS: Add network values, including: version = 1 (version number), [eno1] (external network interface), dhcp4 = true (turns on dhcp4), and primary = true (identifies this interface as the primary interface used by kubelet).
  • environment.DEST_DISK: Identifies the block storage device that holds the network configuration information.
  • environment.DEST_PATH: Identifies the file holding network configuration data (/net.toml in this example).
  • environment.DIRMODE: The Linux permissions assigned to the directory holding network configuration settings.
  • environment.FS_TYPE: The filesystem type associated with the partition holding network configuration settings.
  • environment.GID: The group ID associated with files and directories created on the partition. GID 0 is the root group.
  • environment.MODE: The Linux permissions assigned to files in the partition.
  • environment.UID: The user ID associated with files and directories created on the partition. UID 0 is the root user.
  • image: Container image used to perform the steps needed by this action.

template.tasks.actions.write-user-data (Bottlerocket)

The write-user-data action configures the Tinkerbell Hegel service, which provides the metadata store for Tinkerbell.

  • environment.HEGEL_URL: The IP address and port number of the Tinkerbell Hegel service.
  • environment.DEST_DISK: Identifies the block storage device that holds the network configuration information.
  • environment.DEST_PATH: Identifies the file holding network configuration data (/net.toml in this example).
  • environment.DIRMODE: The Linux permissions assigned to the directory holding network configuration settings.
  • environment.FS_TYPE: The filesystem type associated with the partition holding network configuration settings.
  • environment.GID: The group ID associated with files and directories created on the partition. GID 0 is the root group.
  • environment.MODE: The Linux permissions assigned to files in the partition.
  • environment.UID: The user ID associated with files and directories created on the partition. UID 0 is the root user.
  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.

template.tasks.actions.reboot (Bottlerocket)

The reboot action defines how the system restarts to bring up the installed system.

  • image: Container image used to perform the steps needed by this action.
  • timeout: Time needed to complete the action, in seconds.
  • volumes: The volume (directory) to mount into the container from the installed system.

version

Matches the current version of the Tinkerbell template.

Custom Tinkerbell action examples

By creating your own custom Tinkerbell actions, you can add to or modify the installed operating system so those changes take effect when the installed system first starts (from a reboot or pivot). The following example shows how to add a .deb package (openssl) to an Ubuntu installation:

      - environment:
          BLOCK_DEVICE: /dev/sda1
          CHROOT: "y"
          CMD_LINE: apt -y update && apt -y install openssl
          DEFAULT_INTERPRETER: /bin/sh -c
          FS_TYPE: ext4
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/cexec:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: install-openssl
        timeout: 90

The following shows an example of adding a new user (tinkerbell) to an installed Ubuntu system:

      - environment:
          BLOCK_DEVICE: <block device path> # E.g. /dev/sda1
          FS_TYPE: ext4
          CHROOT: y
          DEFAULT_INTERPRETER: "/bin/sh -c"
          CMD_LINE: "useradd --password $(openssl passwd -1 tinkerbell) --shell /bin/bash --create-home --groups sudo tinkerbell"
        image: public.ecr.aws/eks-anywhere/tinkerbell/hub/cexec:6c0f0d437bde2c836d90b000312c8b25fa1b65e1-eks-a-15
        name: "create-user"
        timeout: 90

Look for more examples as they are added to the Tinkerbell examples page.